掃雷c語言ppt

① 掃雷程序用c語言怎樣寫（附源代碼注釋）

LS寫的不錯.這里提一句,掃雷的規則是，你第一次點擊不會踩雷的。也就是在第一次點擊的時候，會把除了當前點擊位置的其餘所有格子隨機填充雷。第一次永遠不會踩雷。不信調到最密的時候試下。：）

② C語言編簡單的掃雷

給你一個完整的掃雷源碼
#include <conio.h>
#include <graphics.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <ctype.h>
#include "mouse.c"

#define YES 1
#define NO 0

#define XPX 15 /* X pixels by square */
#define YPX 15 /* Y pixels by square */

#define DEFCX 30 /* Default number of squares */
#define DEFCY 28

#define MINE 255-'0' /* So that when it prints, it prints char 0xff */

#define STSQUARE struct stsquare

STSQUARE {
unsigned char value; /* Number of mines in the surround squares */
unsigned char sqopen; /* Square is open */
unsigned char sqpress; /* Square is pressed */
unsigned char sqmark; /* Square is marked */
} *psquare;

#define value(x,y) (psquare+(x)*ncy+(y))->value
#define sqopen(x,y) (psquare+(x)*ncy+(y))->sqopen
#define sqpress(x,y) (psquare+(x)*ncy+(y))->sqpress
#define sqmark(x,y) (psquare+(x)*ncy+(y))->sqmark

int XST, /* Offset of first pixel X */
YST,
ncx, /* Number of squares in X */
ncy,
cmines, /* Mines discovered */
initmines, /* Number of initial mines */
sqclosed, /* Squares still closed */
maxy; /* Max. number of y pixels of the screen */

void Graph_init(void);
void Read_param(int argc, char *argv[]);
void Set_mines(int nminas);
void Set_square(int x, int y, int status);
void Mouse_set(void);
void Draw_squares(void);
int Do_all(void);
void Blow_up(void);
void Open_square(int x, int y);
int Open_near_squares(int x, int y);

/************************************************************************/

void main(int argc, char *argv[])
{
if (!mouse_reset()) {
cputs(" ERROR: I can't find a mouse driver\r\n");
exit(2);
}
Graph_init();
Read_param(argc, argv);
Mouse_set();
do {
randomize();
cleardevice();
Set_mines(cmines=initmines);
mouse_enable();
Draw_squares();
}
while (Do_all() != '\x1b');
closegraph();
}

/*************************************************************************
* *
* F U N C T I O N S *
* *
*************************************************************************/

/*----------------------------------------------------------------------*/

void Graph_init(void)
{
int graphdriver=DETECT, graphmode, errorcode;

if(errorcode < 0) {
cprintf("\n\rGraphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
initgraph(&graphdriver, &graphmode, "");
errorcode=graphresult();
if(errorcode!=grOk) {
printf(" Graphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
maxy=getmaxy();
} /* Graph_init */

/*----------------------------------------------------------------------*/

void Read_param(int argc, char *argv[])
{
int x, y, m;

x=y=m=0;
if (argc!=1) {
if (!isdigit(*argv[1])) {
closegraph();
cprintf("Usage is: %s [x] [y] [m]\r\n\n"
"Where x is the horizontal size\r\n"
" y is the vertical size\r\n"
" m is the number of mines\r\n\n"
" Left mouse button: Open the square\r\n"
"Right mouse button: Mark the square\r\n"
" -The first time puts a 'mine' mark\r\n"
" -The second time puts a 'possible "
"mine' mark\r\n"
" -The third time unmarks the square\r\n"
"Left+Right buttons: Open the surrounded squares only if "
"the count of mines\r\n"
" is equal to the number in the square",argv[0]);
exit (1);
}
switch (argc) {
case 4: m=atoi(argv[3]);
case 3: y=atoi(argv[2]);
case 2: x=atoi(argv[1]);
}
}
XST=100;
ncx=DEFCX;
if (maxy==479) {
YST=30;
ncy=DEFCY;
}
else {
YST=25;
ncy=20;
}
if (x>0 && x<ncx)
ncx=x;
if (y>0 && y<ncy) {
YST+=((ncy-y)*YPX)>>1;
ncy=y;
}
initmines= m ? m : ncx*ncy*4/25; /* There are about 16% of mines */
if (((void near*)psquare=calloc(ncx*ncy, sizeof(STSQUARE)))==NULL) {
closegraph();
cputs("ERROR: Not enought memory");
exit(3);
}
} /* Read_param */

/*----------------------------------------------------------------------*/

void Set_mines(int nminas)
{

③ 急求用c語言編寫掃雷詳細代碼

/*5.3.4 源程序*/
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFTPRESS 0xff01
#define LEFTCLICK 0xff10
#define LEFTDRAG 0xff19
#define MOUSEMOVE 0xff08
struct
{
int num;/*格子當前處於什麼狀態,1有雷，0已經顯示過數字或者空白格子*/
int roundnum;/*統計格子周圍有多少雷*/
int flag;/*右鍵按下顯示紅旗的標志,0沒有紅旗標志,1有紅旗標志*/
}Mine[10][10];
int gameAGAIN=0;/*是否重來的變數*/
int gamePLAY=0;/*是否是第一次玩游戲的標志*/
int mineNUM;/*統計處理過的格子數*/
char randmineNUM[3];/*顯示數字的字元串*/
int Keystate;
int MouseExist;
int MouseButton;
int MouseX;
int MouseY;
void Init(void);/*圖形驅動*/
void MouseOn(void);/*滑鼠游標顯示*/
void MouseOff(void);/*滑鼠游標隱藏*/
void MouseSetXY(int,int);/*設置當前位置*/
int LeftPress(void);/*左鍵按下*/
int RightPress(void);/*滑鼠右鍵按下*/
void MouseGetXY(void);/*得到當前位置*/
void Control(void);/*游戲開始,重新,關閉*/
void GameBegain(void);/*游戲開始畫面*/
void DrawSmile(void);/*畫笑臉*/
void DrawRedflag(int,int);/*顯示紅旗*/
void DrawEmpty(int,int,int,int);/*兩種空格子的顯示*/
void GameOver(void);/*游戲結束*/
void GameWin(void);/*顯示勝利*/
int MineStatistics(int,int);/*統計每個格子周圍的雷數*/
int ShowWhite(int,int);/*顯示無雷區的空白部分*/
void GamePlay(void);/*游戲過程*/
void Close(void);/*圖形關閉*/
void main(void)
{
Init();
Control();
Close();
}
void Init(void)/*圖形開始*/
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
}
void Close(void)/*圖形關閉*/
{
closegraph();
}
void MouseOn(void)/*滑鼠游標顯示*/
{
_AX=0x01;
geninterrupt(0x33);
}
void MouseOff(void)/*滑鼠游標隱藏*/
{
_AX=0x02;
geninterrupt(0x33);
}
void MouseSetXY(int x,int y)/*設置當前位置*/
{
_CX=x;
_DX=y;
_AX=0x04;
geninterrupt(0x33);
}
int LeftPress(void)/*滑鼠左鍵按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&1);
}
int RightPress(void)/*滑鼠右鍵按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&2);
}
void MouseGetXY(void)/*得到當前位置*/
{
_AX=0x03;
geninterrupt(0x33);
MouseX=_CX;
MouseY=_DX;
}
void Control(void)/*游戲開始,重新,關閉*/
{
int gameFLAG=1;/*游戲失敗後判斷是否重新開始的標志*/
while(1)
{
if(gameFLAG)/*游戲失敗後沒判斷出重新開始或者退出遊戲的話就繼續判斷*/
{
GameBegain(); /*游戲初始畫面*/
GamePlay();/*具體游戲*/
if(gameAGAIN==1)/*游戲中重新開始*/
{
gameAGAIN=0;
continue;
}
}
MouseOn();
gameFLAG=0;
if(LeftPress())/*判斷是否重新開始*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)
{
gameFLAG=1;
continue;
}
}
if(kbhit())/*判斷是否按鍵退出*/
break;
}
MouseOff();
}
void DrawSmile(void)/*畫笑臉*/
{
setfillstyle(SOLID_FILL,YELLOW);
fillellipse(290,75,10,10);
setcolor(YELLOW);
setfillstyle(SOLID_FILL,BLACK);/*眼睛*/
fillellipse(285,75,2,2);
fillellipse(295,75,2,2);
setcolor(BLACK);/*嘴巴*/
bar(287,80,293,81);
}
void DrawRedflag(int i,int j)/*顯示紅旗*/
{
setcolor(7);
setfillstyle(SOLID_FILL,RED);
bar(198+j*20,95+i*20,198+j*20+5,95+i*20+5);
setcolor(BLACK);
line(198+j*20,95+i*20,198+j*20,95+i*20+10);
}
void DrawEmpty(int i,int j,int mode,int color)/*兩種空格子的顯示*/
{
setcolor(color);
setfillstyle(SOLID_FILL,color);
if(mode==0)/*沒有單擊過的大格子*/
bar(200+j*20-8,100+i*20-8,200+j*20+8,100+i*20+8);
else
if(mode==1)/*單擊過後顯示空白的小格子*/
bar(200+j*20-7,100+i*20-7,200+j*20+7,100+i*20+7);
}
void GameBegain(void)/*游戲開始畫面*/
{
int i,j;
cleardevice();
if(gamePLAY!=1)
{
MouseSetXY(290,70); /*滑鼠一開始的位置,並作為它的初始坐標*/
MouseX=290;
MouseY=70;
}
gamePLAY=1;/*下次按重新開始的話滑鼠不重新初始化*/
mineNUM=0;
setfillstyle(SOLID_FILL,7);
bar(190,60,390,290);
for(i=0;i<10;i++)/*畫格子*/
for(j=0;j<10;j++)
DrawEmpty(i,j,0,8);
setcolor(7);
DrawSmile();/*畫臉*/
randomize();
for(i=0;i<10;i++)/*100個格子隨機賦值有沒有地雷*/
for(j=0;j<10;j++)
{
Mine[i][j].num=random(8);/*如果隨機數的結果是1表示這個格子有地雷*/
if(Mine[i][j].num==1)
mineNUM++;/*現有雷數加1*/
else
Mine[i][j].num=2;
Mine[i][j].flag=0;/*表示沒紅旗標志*/
}
sprintf(randmineNUM,"%d",mineNUM); /*顯示這次總共有多少雷數*/
setcolor(1);
settextstyle(0,0,2);
outtextxy(210,70,randmineNUM);
mineNUM=100-mineNUM;/*變數取空白格數量*/
MouseOn();
}
void GameOver(void)/*游戲結束畫面*/
{
int i,j;
setcolor(0);
for(i=0;i<10;i++)
for(j=0;j<10;j++)
if(Mine[i][j].num==1)/*顯示所有的地雷*/
{
DrawEmpty(i,j,0,RED);
setfillstyle(SOLID_FILL,BLACK);
fillellipse(200+j*20,100+i*20,7,7);
}
}
void GameWin(void)/*顯示勝利*/
{
setcolor(11);
settextstyle(0,0,2);
outtextxy(230,30,"YOU WIN!");
}
int MineStatistics(int i,int j)/*統計每個格子周圍的雷數*/
{
int nNUM=0;
if(i==0&&j==0)/*左上角格子的統計*/
{
if(Mine[0][1].num==1)
nNUM++;
if(Mine[1][0].num==1)
nNUM++;
if(Mine[1][1].num==1)
nNUM++;
}
else
if(i==0&&j==9)/*右上角格子的統計*/
{
if(Mine[0][8].num==1)
nNUM++;
if(Mine[1][9].num==1)
nNUM++;
if(Mine[1][8].num==1)
nNUM++;
}
else
if(i==9&&j==0)/*左下角格子的統計*/
{
if(Mine[8][0].num==1)
nNUM++;
if(Mine[9][1].num==1)
nNUM++;
if(Mine[8][1].num==1)
nNUM++;
}
else
if(i==9&&j==9)/*右下角格子的統計*/
{
if(Mine[9][8].num==1)
nNUM++;
if(Mine[8][9].num==1)
nNUM++;
if(Mine[8][8].num==1)
nNUM++;
}
else if(j==0)/*左邊第一列格子的統計*/
{
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(j==9)/*右邊第一列格子的統計*/
{
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
}
else if(i==0)/*第一行格子的統計*/
{
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(i==9)/*最後一行格子的統計*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
}
else/*普通格子的統計*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
}
return(nNUM);/*把格子周圍一共有多少雷數的統計結果返回*/
}
int ShowWhite(int i,int j)/*顯示無雷區的空白部分*/
{
if(Mine[i][j].flag==1||Mine[i][j].num==0)/*如果有紅旗或該格處理過就不對該格進行任何判斷*/
return;
mineNUM--;/*顯示過數字或者空格的格子就表示多處理了一個格子,當所有格子都處理過了表示勝利*/
if(Mine[i][j].roundnum==0&&Mine[i][j].num!=1)/*顯示空格*/
{
DrawEmpty(i,j,1,7);
Mine[i][j].num=0;
}
else
if(Mine[i][j].roundnum!=0)/*輸出雷數*/
{
DrawEmpty(i,j,0,8);
sprintf(randmineNUM,"%d",Mine[i][j].roundnum);
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
Mine[i][j].num=0;/*已經輸出雷數的格子用0表示已經用過這個格子*/
return ;
}
/*8個方向遞歸顯示所有的空白格子*/
if(i!=0&&Mine[i-1][j].num!=1)
ShowWhite(i-1,j);
if(i!=0&&j!=9&&Mine[i-1][j+1].num!=1)
ShowWhite(i-1,j+1);
if(j!=9&&Mine[i][j+1].num!=1)
ShowWhite(i,j+1);
if(j!=9&&i!=9&&Mine[i+1][j+1].num!=1)
ShowWhite(i+1,j+1);
if(i!=9&&Mine[i+1][j].num!=1)
ShowWhite(i+1,j);
if(i!=9&&j!=0&&Mine[i+1][j-1].num!=1)
ShowWhite(i+1,j-1);
if(j!=0&&Mine[i][j-1].num!=1)
ShowWhite(i,j-1);
if(i!=0&&j!=0&&Mine[i-1][j-1].num!=1)
ShowWhite(i-1,j-1);
}
void GamePlay(void)/*游戲過程*/
{
int i,j,Num;/*Num用來接收統計函數返回一個格子周圍有多少地雷*/
for(i=0;i<10;i++)
for(j=0;j<10;j++)
Mine[i][j].roundnum=MineStatistics(i,j);/*統計每個格子周圍有多少地雷*/
while(!kbhit())
{
if(LeftPress())/*滑鼠左鍵盤按下*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)/*重新來*/
{
MouseOff();
gameAGAIN=1;
break;
}
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*當前滑鼠位置在格子范圍內*/
{
j=(MouseX-190)/20;/*x坐標*/
i=(MouseY-90)/20;/*y坐標*/
if(Mine[i][j].flag==1)/*如果格子有紅旗則左鍵無效*/
continue;
if(Mine[i][j].num!=0)/*如果格子沒有處理過*/
{
if(Mine[i][j].num==1)/*滑鼠按下的格子是地雷*/
{
MouseOff();
GameOver();/*游戲失敗*/
break;
}
else/*滑鼠按下的格子不是地雷*/
{
MouseOff();
Num=MineStatistics(i,j);
if(Num==0)/*周圍沒地雷就用遞歸演算法來顯示空白格子*/
ShowWhite(i,j);
else/*按下格子周圍有地雷*/
{
sprintf(randmineNUM,"%d",Num);/*輸出當前格子周圍的雷數*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
mineNUM--;
}
MouseOn();
Mine[i][j].num=0;/*點過的格子周圍雷數的數字變為0表示這個格子已經用過*/
if(mineNUM<1)/*勝利了*/
{
GameWin();
break;
}
}
}
}
}
if(RightPress())/*滑鼠右鍵鍵盤按下*/
{
MouseGetXY();
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*當前滑鼠位置在格子范圍內*/
{
j=(MouseX-190)/20;/*x坐標*/
i=(MouseY-90)/20;/*y坐標*/
MouseOff();
if(Mine[i][j].flag==0&&Mine[i][j].num!=0)/*本來沒紅旗現在顯示紅旗*/
{
DrawRedflag(i,j);
Mine[i][j].flag=1;
}
else
if(Mine[i][j].flag==1)/*有紅旗標志再按右鍵就紅旗消失*/
{
DrawEmpty(i,j,0,8);
Mine[i][j].flag=0;
}
}
MouseOn();
sleep(1);
}
}
}

④ 求一份掃雷的c語言代碼.....自己編的...c語言大神在哪裡

#include <stdio.h>
#include <stdlib.h>
#include <time.h>

int width;
/*
輸出橫向坐標
*/
void print_HB() {
int row = 0;
printf(" ");
for (row = 0; row < width; row++) {
printf ("%4d", row + 1);
}
printf("\n");
}
/*
輸出橫向框
*/
void print_HXK() {
int col = 0;
printf(" +");
for (col = 0; col < width * 2; col++) {
if(!((col + 1) % 2)){
printf("+");
}
else {
printf("---");
}
}
printf("\n");
}
/*
顯示盤
*/
void show_map(char panel[][width]){
int row = 0, col = 0;
print_HB();
print_HXK();
for (row = 0; row < width; row++) {
printf("%2d ", row + 1); //輸出豎向坐標
printf("| ");
for (col = 0; col < width; col++) {
printf("%c ", panel[row][col]);
printf("| ");
}
printf("%d\n", row + 1); //輸出豎向坐標
print_HXK(); //橫向框
}
print_HB();
}
/*
初始化盤
*/
void init_map(int num, char panel[][width], char panel2[][width]) {
int i = 0, row = 0, col = 0;
for (row = 0; row < width; row++) {
for(col = 0; col < width; col++) {
panel[row][col] = ' ';
panel2[row][col] = ' ';
}
}
for (i = 0; i < num; i++) {
row = rand() % width;
col = rand() % width;
if (panel[row][col] == '*') {
i--;
}
else {
panel[row][col] = '*';
}
}
}
/*
根據布置好的雷計算雷周圍的數字
*/
void fillNumber(char panel[][width]) { //填充數字
int row = 0, col = 0;
for (row = 0; row < width; row++) {
for (col = 0; col < width; col++) {
int num = 0;
//如果是雷，則不需要計算該位置周圍的雷數，繼續循環即可
if (panel[row][col] == '*') continue;
if ((row -1) >= 0 && (col - 1) >= 0) { //檢測左上角是否在盤內
if (panel[row - 1][col -1] == '*') num++;//檢測左上角是雷，則num加1
}
if ((row - 1) >= 0) { //正上方
if (panel[row - 1][col] == '*') num++;
}
if ((row - 1) >= 0 && (col + 1) < width) { //右上角
if (panel[row - 1][col + 1] == '*') num++;
}
if ((col -1) >= 0) { //左邊
if (panel[row][col - 1] == '*') num++;
}
if ((col + 1) < width) { //右邊
if (panel[row][col + 1] == '*') num++;
}
if ((row + 1) < width && (col -1) >= 0) { //左下角
if (panel[row + 1][col - 1] == '*') num++;
}
if ((row + 1) < width) { //正下方
if (panel[row + 1][col] == '*') num++;
}
if ((row + 1) < width && (col + 1) < width) { //右下角
if (panel[row + 1][col + 1] == '*') num++;
}
panel[row][col] = '0' + num; //將計算出的周圍的雷數整型轉換成字元型，並賦值
}
}
}
/*
點到0，顯示多個數字
*/
void show_mul(char panel[][width], int row, int col,char panel2[][width]) {
panel2[row][col] = panel[row][col]; //顯示數字
if ((row - 1) >= 0 && (col - 1) >= 0) { //檢測[左上角]是否在盤內
//如果[左上角]依舊是0並且panel2相應的位置還為空，則以[左上角]為中心繼續顯示多個數字
if (panel[row - 1][col - 1] == '0' && panel2[row - 1][col - 1] == ' ')
show_mul(panel, row - 1, col - 1, panel2);
else panel2[row -1][col - 1] = panel[row - 1][col - 1];
}
if ((row - 1) >= 0) { //正上方
if (panel[row - 1][col] == '0' && panel2[row -1][col] == ' ')
show_mul(panel, row - 1, col, panel2);
else panel2[row - 1][col] = panel[row - 1][col];
}
if ((row - 1) >= 0 && (col + 1) < width) { //右上角
if (panel[row - 1][col + 1] == '0' && panel2[row - 1][col + 1] == ' ')
show_mul(panel, row - 1, col + 1, panel2);
else panel2[row - 1][col + 1] = panel[row - 1][col + 1];
}

if ((col - 1) >= 0) { //左邊
if (panel[row][col - 1] == '0' && panel2[row][col - 1] == ' ')
show_mul(panel, row, col - 1, panel2);
else panel2[row][col -1] = panel[row][col -1];
}
if ((col + 1) < width) {//右邊
if (panel[row][col + 1] == '0' && panel2[row][col + 1])
show_mul(panel, row, col + 1, panel2);
else panel2[row][col + 1] = panel[row][col + 1];
}

if ((row + 1) < width && (col - 1) >= 0) { //左下角
if (panel[row + 1][col - 1] == '0' && panel2[row + 1][col - 1] == ' ')
show_mul(panel, row + 1, col - 1, panel2);
else panel2[row + 1][col - 1] = panel[row + 1][col - 1];
}
if ((row + 1) < width) { //正下方
if (panel[row + 1][col] == '0' && panel2[row + 1][col] == ' ')
show_mul(panel, row + 1, col, panel2);
else panel2[row + 1][col] = panel[row + 1][col];
}
if ((row + 1) < width && (col + 1) < width) { //右下角
if (panel[row + 1][col + 1] == '0' && panel2[row + 1][col + 1] == ' ')
show_mul(panel, row + 1, col + 1, panel2);
else panel2[row + 1][col + 1] = panel[row + 1][col + 1];
}
}
/*
找雷
*/
int find(char panel[][width], int row, int col, int flag, char panel2[][width]) {
if (flag == 1) { //猜測是雷
panel2[row][col] = 'D';
if (panel[row][col] == '*') {
return 1;
}
else {
return 0;
}
}
else { //猜測不是雷
if (panel[row][col] == '*') { //點到雷，游戲失敗
return 2;
}
else if (panel[row][col] == '0') { //點擊到0，顯示多個數字
show_mul(panel, row, col, panel2);
return 0;
}
else {
panel2[row][col] = panel[row][col];//顯示數字
return 0;
}
}
}
/*
主函數
*/
int main() {
srand(time(0));
printf("width =? "); //設定盤大小
scanf("%d", &width);
printf("the number of trap is?"); //設置要布置雷的個數
int num;
scanf("%d", &num);
char panel[width][width];
char panel2[width][width];
int row = 0, col = 0, flag = 0;
while (1) {
init_map(num, panel, panel2); //初始化panel，panel2
fillNumber(panel); //填充雷周圍的數字
//show_map(panel);
show_map(panel2); //顯示空盤
int i = 0;
for (i = 0; i < num; i++) {
printf("請輸入行號和列號以及是否是雷（1代表是，0代表不是）:");
scanf("%d%d%d", &row, &col, &flag);
int b = find(panel, row - 1, col - 1, flag, panel2);
if (b == 2){ //點到雷
break;
}
else if (b){ //找到雷
system("clear");
show_map(panel2);
continue;
}
i--;
system("clear");
show_map(panel2); //顯示盤
}
if (i < num) { //點到雷
printf("點到雷了,游戲結束\n");
}
else { //找到了全部的雷
printf("恭喜你，你贏了！！\n");
}
int iscontinue = 0;
printf("是否開始新的游戲(1代表YES，0代表NO)？");
scanf("%d", &iscontinue);
if (!iscontinue) break;
}
printf("拜拜，歡迎下次再來玩！！\n");
return 0;
}

以前自己寫的，僅供參考

⑤ 如何用C語言編程 掃雷！~

C語言模擬掃雷的代碼如下：

#include<stdio.h>
#include<time.h>
#include<stdlib.h>
int map[9][9] = {0};
int result[9][9] = {0};
int mine[10][2];

bool Check(int i)
{
int j;
for(j=0;j<i;j++)
if(mine[j][0] == mine[i][0] && mine[j][1] == mine[i][0]) return true;
return false;
}

int MineNum(int x,int y) //這個函數計算坐標(x,y)周圍地雷的數目
{
int sum = 0;
int i,j;
if(x-1>=0 && x+1<=8 && y-1>=0 && y+1<=8)
{//中間位置
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==0 && y==0) return (map[0][1]+map[1][0]+map[1][1])/9; //左上角
if(x==0 && y==8) return (map[0][7]+map[1][7]+map[1][8])/9; //右上角
if(x==8 && y==0) return (map[7][0]+map[7][1]+map[8][1])/9; //左下角
if(x==8 && y==8) return (map[7][7]+map[7][8]+map[8][7])/9; //右上角
if(x==0)
{//上邊界
for(i=x;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==8)
{//下邊界
for(i=x-1;i<=x;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==0)
{//左邊界
for(i=x-1;i<=x+1;i++)
for(j=y;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==8)
{//右邊界
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
}

void main()
{
int i,j,x,y;
srand((int)time(0));
for(i=0;i<10;i++)
{
do{
mine[i][0] = rand()%9;
mine[i][1] = rand()%9;
}while(Check(i));
printf("%d\t%d\n",mine[i][0],mine[i][1]);
}

//標識地雷
for(i=0;i<10;i++) map[mine[i][0]][mine[i][1]] = 9;

//計算地雷的數目
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
if(map[i][j] == 9) result[i][j] = 9;
else result[i][j] = MineNum(i,j);
printf("%d ",result[i][j]);
}
printf("\n");
}
}

⑥ c程序編程掃雷

希望對你有幫助！
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFTPRESS 0xff01
#define LEFTCLICK 0xff10
#define LEFTDRAG 0xff19
#define MOUSEMOVE 0xff08
int num[10][10];/*范圍*/
int p[10][10];/*統計雷的數組*/
int loop;/*重新來的標志*/
int again=0;/*是否重來的變數*/
int scorenum;/*一開始統計有幾個雷*/
char score[3];/*輸出一共有幾個地雷*/
int Keystate;
int MouseExist;
int MouseButton;
int MouseX;
int MouseY;
/*滑鼠游標形狀定義*/
typedef struct
{
unsigned int shape[32];
char hotx;
char hoty;
}SHAPE;

/*箭頭型*/
SHAPE ARROW={
{
0x3fff,0x1fff,0x0fff,0x07ff,
0x03ff,0x01ff,0x00ff,0x007f,
0x003f,0x00ff,0x01ff,0x10ff,
0x30ff,0xf87f,0xf87f,0xfc3f,
0x0000,0x7c00,0x6000,0x7000,
0x7800,0x7c00,0x7e00,0x7f00,
0x7f80,0x7e00,0x7c00,0x4600,
0x0600,0x0300,0x0300,0x0180
},
0,0,
};

/*滑鼠游標顯示*/
void MouseOn()
{
_AX=0x01;
geninterrupt(0x33);
}

/*滑鼠游標掩示*/
void MouseOff()/*滑鼠游標隱藏*/
{
_AX=0x02;
geninterrupt(0x33);
}
void MouseSetXY(int x,int y)/*設置當前位置*/
{
_CX=x;
_DX=y;
_AX=0x04;
geninterrupt(0x33);
}
int LeftPress()/*左鍵按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&1);
}
void MouseGetXY()/*得到當前位置*/
{
_AX=0x03;
geninterrupt(0x33);
MouseX=_CX;
MouseY=_DX;
}
begain()/*游戲開始畫面*/
{
int i,j;
loop: cleardevice();
MouseOn();
MouseSetXY(180,30);
MouseX=180;
MouseY=30;
scorenum=0;
setfillstyle(SOLID_FILL,7);
bar(190,60,390,290);
setfillstyle(SOLID_FILL,8);
for(i=100;i<300;i+=20)/*畫格子*/
for(j=200;j<400;j+=20)
bar(j-8,i+8,j+8,i-8);
setcolor(7);
setfillstyle(SOLID_FILL,YELLOW);/*畫臉*/
fillellipse(290,75,10,10);
setcolor(YELLOW);
setfillstyle(SOLID_FILL,0);
fillellipse(285,75,2,2);
fillellipse(295,75,2,2);
setcolor(0);
bar(287,80,293,81);
randomize();
for(i=0;i<10;i++)
for(j=0;j<10;j++)
{
num[i][j]=random(7)+10;/*用10代表地雷算了*/
if(num[i][j]==10)
scorenum++;
}
sprintf(score,"%d",scorenum);
setcolor(1);
settextstyle(0,0,2);
outtextxy(210,70,score);
scorenum=100-scorenum;/*為了後面判斷勝利*/
}
gameove()/*游戲結束畫面*/
{
int i,j;
setcolor(0);
for(i=0;i<10;i++)
for(j=0;j<10;j++)
if(num[i][j]==10)/*是地雷的就顯示出來*/
{
setfillstyle(SOLID_FILL,RED);
bar(200+j*20-8,100+i*20-8,200+j*20+8,100+i*20+8);
setfillstyle(SOLID_FILL,0);
fillellipse(200+j*20,100+i*20,7,7);
}
}
int tongji(int i,int j)/*計算有幾個雷*/
{
int x=0;/*10代表地雷*/
if(i==0&&j==0)
{
if(num[0][1]==10)
x++;
if(num[1][0]==10)
x++;
if(num[1][1]==10)
x++;
}
else if(i==0&&j==9)
{
if(num[0][8]==10)
x++;
if(num[1][9]==10)
x++;
if(num[1][8]==10)
x++;
}
else if(i==9&&j==0)
{
if(num[8][0]==10)
x++;
if(num[9][1]==10)
x++;
if(num[8][1]==10)
x++;
}
else if(i==9&&j==9)
{
if(num[9][8]==10)
x++;
if(num[8][9]==10)
x++;
if(num[8][8]==10)
x++;
}
else if(j==0)
{
if(num[i][j+1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i-1][j]==10)
x++;
if(num[i-1][j+1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
}
else if(j==9)
{
if(num[i][j-1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i-1][j]==10)
x++;
if(num[i-1][j-1]==10)
x++;
if(num[i+1][j-1]==10)
x++;
}
else if(i==0)
{
if(num[i+1][j]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i+1][j-1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
}
else if(i==9)
{
if(num[i-1][j]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i-1][j-1]==10)
x++;
if(num[i-1][j+1]==10)
x++;
}
else
{
if(num[i-1][j]==10)
x++;
if(num[i-1][j+1]==10)
x++;
if(num[i][j+1]==10)
x++;
if(num[i+1][j+1]==10)
x++;
if(num[i+1][j]==10)
x++;
if(num[i+1][j-1]==10)
x++;
if(num[i][j-1]==10)
x++;
if(num[i-1][j-1]==10)
x++;
}
return(x);
}
funcheck(int i,int j)/*開始找無雷*/
{
scorenum--;
if(p[i][j]==0&&num[i][j]!=10)
{
setfillstyle(SOLID_FILL,7);/*顯示無雷區*/
bar(200+j*20-7,100+i*20-7,200+j*20+7,100+i*20+7);
num[i][j]=-1;
}
else if(p[i][j]!=0)
{
sprintf(score,"%d",p[i][j]);/*輸出雷數*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,score);
num[i][j]=-1;
return ;
}
if(i!=0&&num[i-1][j]!=-1&&num[i-1][j]!=10)/*第歸開始*/
funcheck(i-1,j);
if(i!=0&&j!=9&&num[i-1][j+1]!=-1&&num[i-1][j+1]!=10)
funcheck(i-1,j+1);
if(j!=9&&num[i][j+1]!=-1&&num[i][j+1]!=10)
funcheck(i,j+1);
if(j!=9&&i!=9&&num[i+1][j+1]!=-1&&num[i+1][j+1]!=10)
funcheck(i+1,j+1);
if(i!=9&&num[i+1][j]!=-1&&num[i+1][j]!=10)
funcheck(i+1,j);
if(i!=9&&j!=0&&num[i+1][j-1]!=-1&&num[i+1][j-1]!=10)
funcheck(i+1,j-1);
if(j!=0&&num[i][j-1]!=-1&&num[i][j-1]!=10)
funcheck(i,j-1);
if(i!=0&&j!=0&&num[i-1][j-1]!=-1&&num[i-1][j-1]!=10)
funcheck(i-1,j-1);
}

playgame()/*游戲過程*/
{int i,j,numx;
for(i=0;i<10;i++)
for(j=0;j<10;j++)
p[i][j]=tongji(i,j);/*把標記有幾個雷的數字都存放起來*/
while(!kbhit())
{
if(LeftPress())/*左鍵盤按下*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)/*重新來*/
{
MouseOff();
again=1;
break;
}
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*是否在游戲范圍內*/
{
j=(MouseX-190)/20;/*x坐標*/
i=(MouseY-90)/20;/*y坐標*/
if(num[i][j]!=-1)
{
if(num[i][j]==10)/*中雷*/
{
MouseOff();
gameove();/*失敗*/
break;
}
else/*非中雷*/
{
MouseOff();
numx=tongji(i,j);
if(numx==0)/*周圍沒地雷*/
funcheck(i,j);/*開始找無雷*/
else/*有地雷*/
{
sprintf(score,"%d",numx);/*輸出雷數*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,score);
scorenum--;
}
MouseOn();
num[i][j]=-1;
if(scorenum<1)/*勝利了*/
{
setcolor(11);
settextstyle(0,0,2);
outtextxy(230,30,"YOU WIN!");
break;
}
}
}
}
}
}
}
main()
{int gd=DETECT,gr;
registerbgidriver(EGAVGA_driver);
initgraph(&gd,&gr,"c:\\tc");
loop: begain();
playgame();/*具體游戲*/
if(again)/*游戲中重新開始*/
{
again=0;
goto loop;
}
MouseOn();
while(!kbhit())/*重新來*/
{
if(LeftPress())
{
MouseGetXY();/*失敗後重新來*/
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)
goto loop;
}
}
MouseOff();
closegraph();
}

本文來自: 中科軟體園(www.4oa.com) 詳細出處參考：http://www.4oa.com/Article/html/6/31/446/2005/15615.html

⑦ 求一個用c語言編寫的掃雷的程序

有趣，標記一下

⑧ 掃雷游戲 c語言

10塊錢都沒人搞 真心話

⑨ 掃雷C語言

直接一個BMP背景，定好坐標再加上你上面沒有邊框的，再處理一下邊界問題就解決了。你把功能解決了，界面的東西交給美工去做吧。